Elite 1000 + Premium Universal Wire-in Harness Kit Length: 5.0m (16′)

Name: Elite 1000 + Premium Universal Wire-in Harness Kit Length: 5.0m (16')
SKU: 5336
Price: 1455.30 EUR
Availability: InStock

€1,455.30

Part Number: HT-150805

Availability: 1 week

LENGTH: 5.0m (16′)

OUTPUTS: Up to 4 injector and 4 ignition.

SUITS: Universal 1-12 cylinder or 2 rotor applications.

INCLUDES: Elite 1000 ECU, Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits, USB programming cable and USB Software Key.

NOTES: Basic, two connector ECU kit ideally suited for popular 1990s and early 2000s performance engines.

All prices are exclusive of Irish VAT. VAT is charged at 23% where applicable.

Add to Wishlist

Category: Haltech Universal ECU's Tags: 1-12 cyl, 4 ign, 4 inj, Haltech, harness, Ireland, mapping, Premium, TDP, tdp.ie, Universal

Description

ECU OVERVIEW

Haltech’s Elite 1000 ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed case, intake cam control, short term and long term map learning, knock control, and much more, the Elite 1000 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1000 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.

Supports 1 to 12 Cylinder engines
2 Rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
Staged, Sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN.
Waterproof Case (With Pocket Cover Fitted)
4 x Fuel Injection Outputs

4 x Ignition Outputs
10 x Digital Outputs
10 x Analogue Voltage Inputs
4 x Synchronised Pulsed Inputs
3 x Dedicated inputs (Knock, ignition Switch & onboard MAP Sensor)
2 x Dedicated Engine Position Inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB Laptop communication (Windows)
ESP Calibration Software – Intuitive and easy to use

ECU FUNCTIONS

Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
Flex Fuel Function (Direct sensor input) – Tune your engines boost, fuel and ignition by ethanol content
Flexible tuning setup for Petrol (Gasoline), Methanol and Ethanol allows you to simply select your fuel type
Closed Loop O2 Control – Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
Knock Control – Synchronised to engine position with high speed digital filtering for accurate detection
Variable cam control – Independently control up to 2 intake camshafts – Requires a minimum of 1 user defined input & output per variable cam
Closed Loop Idle Speed Control with learning for consistent idle stability. Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
Long term learning (Auto tune) on fuel, cam, boost & idle control maps (up to 4D)
On-board data logging – Up to 20 channels of logging at sample rates up to 50ms with 1MB of internal memory
Laptop data logging -Data log all available channels directly to your laptops hard drive for both tuning and diagnostics
Dual CAN Bus communication for Haltech Dashes and expansion devices & OBDII (view live engine data & set and clear diagnostic trouble codes)
Injection Stages 1 – 4 with individual injector flow rates per injector
Anti-Lag/Rotational idle – for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
Rolling Anti-Lag – lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
Launch Control – Control your engines power delivery, RPM & boost for consistent performance at the start line

ADVANCED TUNING

Tuning Table Resolution up to 32 x 32
Limitless tuning flexibility -Tune your engine by a combination of 3D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, EGT or any channel for ultimate flexibility – Dual
is a thing of the past.
Per Cylinder Tuning Correction – 3D
Wideband O2 – Connect up to 7 Channels via CAN expansion devices
Thermocouples/EGT (Exhaust Gas Temperature) – Connect up to 12 Channels via external CAN expansion devices
Traction Control – Control your engines power output via mappable front vs rear axle or individual wheel speed slip.

IMPORTANT USA EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle’s emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.

Elite 1000 + Premium Universal Wire-in Harness Kit Length: 5.0m (16′)

All prices are exclusive of Irish VAT. VAT is charged at 23% where applicable.

Related products

Login

Register