Features
- Full colour display, logger and controller all-in-one eliminates the need for separate devices (I/O and logging optional)
- Includes a built-in array of 10 programmable, multi-coloured Diffused LEDs for shift lights and other driver alerts
- Impressive 125mm full colour LCD screen (approx 5″) – ultra bright, high resolution and anti-reflective for easy viewing, even in direct sunlight
- Configurable channels and labels allow comprehensive customisation within the supplied layouts
- Display Creator upgrade enables full customisation of the display graphics, including imported images, logos, custom icons, tailored screen layouts, creative gauges and more.
- Supports Wideband Lambda from MoTeC PLMs or LTCs, using Bosch LSU or NTK UEGO 5 wire sensors
- Can be used standalone or in conjunction with other electronic devices including MoTeC CAN-based Expanders
- Also available: cost effective C125 Race Kits which include a plug-in loom with power adaptor, buttons, GPS and optional ECU adaptors.
- Display and Logging Kits available
Logging and Analysis
- Level 1: Optional 120 MB internal data logging – can be enabled at the time of purchase or later using a convenient password activation.
- Fast download of internal logging via Ethernet
- Level 2: Optional USB logging to a removable storage device. Requires internal logging to be enabled as a prerequisite.
-
- Removable storage devices:
-
- Kingston 32 GB USB3 Flash Drive: Fast, low weight and low cost, not mechanically latched or waterproof.
- MoTeC 32 GB USB3 Data Plug: Mechanically latched, waterproof with anodised housing, ideal for exposure to the elements and vibration.
- Accommodates over 300 channels derived from a mixture of analogue and digital inputs, RS232 and CAN data channels (optional I/O upgrade required for analogue and digital inputs)
- Configurable to use sensors from some existing engine management systems, including factory ECUs via OBD-II (adaptors required, sold separately)
- Includes i2 Standard data analysis software (i2 Pro available as an upgrade)
Display
For full customisation of the display layout and graphics add the Display Creator option. See examples.
As standard:
- Numerous selectable layouts supplied, including an RPM sweep, RPM dial and a multi-value style ideal for the dyno or warm up
- Each is available in four colour variations (red, green, blue, white)
- Configurable channels, measurement units and warnings
- 48 user-defined alarms, for example Low Oil Pressure, Low Fuel, Fastest Lap
- Programmable overrides – particularly useful for showing values such as lap times
- All layouts include a multi-purpose, zero-centred bar graph primarily for Lap Gain/Loss but can be configured for other purposes such as Fuel Level, G-Force (Lat or Long) and Steering Angle
- Can be turned on or off
- Three programmable ‘pages’ enable users to tailor layouts for different scenarios, for example: Dyno, Qualifying, Race, Driver 1/Driver 2
- Ensures only the most relevant information is displayed at any given time
Specifications
Display
For full customisation of the display layout and graphics, add the Display Creator option. See examples.
- Screen: Colour TFT LCD, anti-reflective
- Resolution: 800 x 480, anti-aliased graphics
- Selectable fixed layouts with channel and label configurability
- 48 user-defined, scrollable message lines with programmable overrides
- 3 programmable ‘pages’, for example Practice, Warm-Up, Race
Communications
- 2 x Configurable CAN buses with individually programmable CAN bus speeds
- One can be used as RS232 Receive
- RS232: 2 x RS232 ports
- One with Transmit and Receive
- One with Receive only
Physical
- Dimensions 134.5 x 101.8 x 19.4 mm excluding connector
- Weight 342 g
- 1 x 34 pin waterproof connector
- 1 x Mini USB port
- Housing: IP67 rated
- Diffused LEDs
Logging (optional – requires Logging Upgrade/s)
- Level 1: 120 MB logging memory
- Level 2: USB Logging to a removable storage device (flash drive)
- 32 GB USB storage devices available
- requires compatible hardware*
- Logging rates up to 500 samples per second
- Fast Ethernet download
- Includes i2 Standard data analysis software (i2 Pro available as an upgrade)
Inputs
- 2 x Digital inputs
- 3 x Speed inputs
- 1 x Composite Video Input for the connection of a PAL or NTSC camera*
Inputs (optional – requires I/O Upgrade)
- 6 x Analogue voltage inputs
- 2 x Analogue temperature inputs
Outputs (optional – requires I/O Upgrade)
- 4 x Low side outputs
- PWM or switched operation
Internal Sensors
- 3-axis G sensor
- Dash temperature sensor
- Sensor supply voltage
- Battery voltage
Expanders
- Compatible with MoTeC E888 and E816 Expanders, providing full functionality.