Key advantages to the new M1 solutions are:
- Latest generation high performance processor
- Large logging memory, fast Ethernet downloads
- Compact and lightweight in robust magnesium enclosure
- Supports direct injection and port injection applications
- Supports advanced logging features including Pro Analysis (i2 Pro)
- Advanced security system, incorporating an anti-tampering microprocessor
- Access log-in levels for multiple users
M1 Tune
M1 Tune software is free to download, within the program is a sample package for you to examine.
You can also watch introductory webinars on M1 Tune via YouTube:
Below is a table comparing our feature-packed ECUĀ range.Ā Click on the model in the header row of the table to highlight.Ā Ā Download the selected ECUs datasheet.
Ā Ā M130 | Ā Ā M150 | Ā Ā M170 | Ā Ā M190 | Ā Ā M142 | Ā Ā M182 | |
Injector | ||||||
Direct Injector Outputs | 8 | 12 | ||||
Max hold current (A) | 12 | 12 | ||||
Injector Voltage (max) | 90 V | 90 V | ||||
Peak & Hold Outputs (can also drive saturated) |
8 |
12 | 8 | 12 | ||
Low Side Outputs | 12 | 6* | 6* | |||
Ignition | ||||||
Low Side Ignition Outputs (max) |
8 |
12 | 8 | 12 | 8 | 12 |
Auxiliary Outputs | ||||||
Low Side Output |
2 |
6 | 2 | 6 | 6* | 6* |
Half Bridge Output |
6 |
10 | 6 | 10 | 10 | 10 |
Inputs | ||||||
Universal Digital Input |
7 |
12 | 8 | 12 | 12 | 12 |
Digital Input | 4 | 4 | 4 | 4 | ||
Analogue Voltage Input |
8 |
17 | 8 | 17 | 17 | 17 |
Analogue Temp Input |
4 |
6 | 4 | 6 | 6 | 6 |
Lambda (Narrow band) |
0 |
2 | 0 | 2 | 2 | 2 |
Knock |
2 |
4 | 2 | 4 | 4 | 4 |
Data | ||||||
CAN Bus/RS232/LIN |
1/0/0 |
3/1/1 | 1/0/0 | 3/1/1 | 3/1/1 | 3/1/1 |
Logging Memory (MB) |
250# |
250 | 250 | 250 | 250 | 250 |
Physical Size (mm) | ||||||
107x127x39 (mm) | ||||||
162x127x39 (mm) | ||||||
Weight (g) |
290g |
450g | 310g | 490g | 490g | 530g |
No. of Connectors | ||||||
Plastic |
2 |
4 | 4 | |||
Autosport | 1 | 3 | 3 | |||
Pins |
60 |
120 | 66 | 136 | 120 | 136 |
*Maximum current is application dependent
Whether you are new to MoTeC or are accustomed to our olderĀ ECUs, learning M1 terminology and becoming familiar with these definitions will help you get to know our M1 ECUs:
M1 Package:
AnĀ M1 PackageĀ is the file that is loaded into an M1 ECU. AnĀ M1 PackageĀ contains the entire ECU state including the tuning data, Worksheets, security and theĀ M1 Firmware.Ā M1 PackagesĀ themselves are opened and modified in M1 Tune.
M1 Build Project:
AnĀ M1 Build ProjectĀ is the complete source-level definition which is compiled using M1 Build into anĀ M1 Package. AĀ ProjectĀ defines the M1 ECU functionality, and is designed within the M1 Build application.
M1 Firmware:
M1 Firmware is the ECU operating code which is generated by M1 Build by compiling anĀ M1 Build Project. This is distinct from anĀ M1 Package, as it does not contain the tuning data or Worksheets. A firmware can be loaded into an ECU that has a matching Firmware Licence.
ECU Licence:
An ECU Licence is the file that is loaded into an M1 ECU that contains one or moreĀ Firmware Licence(s)Ā and ECU Options such as logging. TheĀ Firmware LicencesĀ contained within theĀ ECU LicenceĀ control whichĀ M1 FirmwareĀ can be loaded into the ECU. An ECU can be limited to allow the loading of one M1 Firmware only, or multiple depending on theĀ ECU LicenceĀ contents.
M1 Build Key:
This is issued to M1 developers at the time of purchasing the M1 ECU and Development Licence. It is used as a security measure to ensure that a developerās firmware can only be loaded into an ECU with the matchingĀ M1 Development Licence.
M1 Development Licence:
This is the Licence that turns an M1 ECU into a Development ECU. TheĀ M1 Development LicenceĀ is installed into an M1 ECU at the time of purchase and allows the loading of firmwares built with the matchingĀ M1 Build Key.
Development ECU:
This is an M1 ECU that contains anĀ M1 Development Licence. The particular model of hardware is selectable.
Tuning Data:
In the M1 environment, the tuning and calibration information used within an M1 Package is considered to be theĀ Tuning Data. When a Package is first built, all of this data is left blank. To populate the tables and parameters, these values can be migrated from an existingĀ PackageĀ or filled in one item at a time using M1 Tune.
M1 Package Archive:
This is the distribution file which is used for allĀ M1 Packages, either through the website or for passing Packages from one PC to another. AĀ Package ArchiveĀ is a self-extracting file which is unpacked by an installed version of Tune, into the correct directory, without the end user needing to know the directory structure or naming systems.
M1 Public Package:
This is a Package developed in-house by MoTeC engineers for a particular application. It is visible to all onĀ MoTeC Online, and may be installed in an M1 ECU with a matching Licence, which may be purchased via a dealer through MoTeC Online. MoTeC support staff can offer comprehensive assistance for these products.
M1 Beta Package:
This is either a pre-release version of a new Package, or a pre-release update of an existing Package. In either case it is available to logged-in users, but may not have complete help or all features implemented. It is made available without obligation, and will not be supported by MoTeC support staff until publicly released.
M1 Partner Package:
This is a Package developed by an M1 Developer using anĀ M1 Build KeyĀ and anĀ M1 Development ECU. It may be based on a Public Package with unique features added by the developer to offer a specific solution.
A Partner Package is visible inĀ MoTeC OnlineĀ only to the partner, after login. They can purchase a Licence for each ECU and sell this on to their customers. MoTeC support staff will not provide assistance for these Packages, it must be provided by the Partner.