-
×
MoTeC C127
2 × €2,817.03 -
×
MoTeC GP Lite Package licence only
2 × €570.61 -
×
Level 3 Data Logging
1 × €484.74 -
×
MoTeC C1212
2 × €4,102.30 -
×
MoTeC M1 Development
2 × €100.00 -
×
MoTeC M1 M142 Electronic Control Unit DI
2 × €3,761.60 -
×
MoTeC Rotary Controller 5 Button
1 × €574.76 -
×
EVO X 4B11T Active Center Differential Control MoTeC M1 Partner Package
1 × €895.00 -
×
MoTeC PDM 32
1 × €4,330.81 -
×
MoTeC C125
1 × €2,257.51 -
×
Level 2 Data Logging
3 × €346.24 -
×
MoTeC C185
1 × €4,405.61 -
×
MoTeC D175
1 × €2,203.50
Elite 2000/2500 Toyota Chaser JZX100 (1JZ-GTE) Plug ‘n’ Play Adaptor Harness Kit
€395.00
Part Number: HT-141246
Availability: 1 week
SUITS: Plug ‘n’ Play replacement of the factory ECU for Toyota Mark II/Cresta/Chaser JZX100 1JZ-GTE VVT-I (JDM) Soarer (MY96-01) JZZ30 1JZ-GTE VVT-I (JDM) Manual transmissions only.
INCLUDES: Elite 2500 ECU with DBW and Race Functions, injection molded plastic plug ‘n’ play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins, USB programming cable and software CD.
All prices are exclusive of Irish VAT. VAT is charged at 23% where applicable.
If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug’n’Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
- simple Haltech Plug’n’Play product that allows you to be up and running in just a few hours.
- quick start guide will walk you through installation of the Haltech Plug’n’Play adaptor into your vehicle.
- guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
- harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
IMPORTANT USA EMISSIONS NOTICE:
In many states, it is unlawful to tamper with your vehicle’s emissions equipment. Haltech products are designed and sold for sanctioned off-road/competition non-emissions controlled vehicles only and may never be used on a public road or highway. Using Haltech products for street/road use on public roads or highways is prohibited by law unless a specific regulatory exemption exists (more information can be found on the SEMA Action Network website www.semasan.com/emissions for state by state details in the USA). It is the responsibility of the installer and/or user of this product to ensure compliance with all applicable local and federal laws and regulations. Please check with your local vehicle authority before purchasing, using or installing any Haltech product.
Related products
